
Water Testing Before You Sign a Repair Contract: What an ASTM E1105 Leak Test Actually Tells Your Board
A sealant proposal looks straightforward on paper: remove the failed caulk, prep the joint, install new backer rod and sealant, done. But on a coastal SWFL building, "where the water is actually getting in" is often a different question than "where the stain shows up inside." That gap is exactly what field water testing is designed to close — and it's a step we build into our scoping process before we ever write a repair contract, not something we add later when the first fix doesn't hold.
The industry standard for this kind of testing is ASTM E1105, a controlled water-spray test that applies a calibrated amount of water to a specific section of wall, window, or joint under a known pressure differential, then monitors the interior for intrusion. It sounds simple. The value is in what it rules out.
Why Boards Need This Before Signing, Not After
Most water intrusion complaints come to a board as a symptom: a stain on a ceiling, a damp baseboard, a musty smell in a storage room. The instinct is to repair the nearest visible defect — recaulk the window, patch the stucco crack directly above the stain — and hope it resolves. Water doesn't always travel straight down, though. It can enter at a window head, track along a lintel, and surface three feet away and one floor below. Repair the wrong spot and the board pays twice: once for work that didn't fix anything, and again for the interior damage that kept accumulating while everyone thought the problem was solved.
An ASTM E1105 test, run before a repair contract is signed, tells us — and tells the board — exactly where water is entering under real-world wind-driven rain conditions, not where it's assumed to be entering based on where the damage shows up. That distinction changes the scope of work, and it changes the price. A board that signs a contract based on an assumption is often signing up for a correction job six months later.
What the Test Actually Tells You
A properly conducted water test gives a board three things a visual inspection alone can't:
- A confirmed entry point. Not a probable one — a verified one, documented with the test apparatus in place and water actively entering at a specific location.
- A scope boundary. Testing an isolated section first means we're not guessing whether the fix needs to cover one window or an entire elevation. We find out before the proposal is written, not during the punch list.
- A baseline for verification. After the repair is complete, we can re-test the same location under the same conditions and confirm — not assume — that the leak is actually resolved before the scaffold comes down.
That last point matters more than most boards realize. Without a post-repair verification test, "the leak is fixed" is really just "we haven't heard a complaint yet." On a building with dozens or hundreds of units, that's not a standard we're comfortable working to, and it shouldn't be one a board accepts either.
Where Testing Changes the Conversation With Your Board
We've seen water testing turn a disputed, vague repair request into a scoped, defensible project more than once. When a board can point to documented test results showing exactly where and how water is entering, it's a different conversation with ownership, with the reserve committee, and — if it comes to it — with an insurer or an engineer of record. "Our contractor tested it and found the entry point at the window-to-stucco transition on the north elevation" is a very different sentence than "we think it's probably the windows." It also protects the board from the opposite problem: scope creep. If a contractor wants to recommend replacing every sealant joint on the building, a water test either supports that recommendation with evidence or shows that the problem is actually isolated to a handful of locations — saving the association from paying for work it doesn't need.
When We Recommend Testing
Not every sealant or waterproofing job needs a full E1105 test — a straightforward joint replacement on a building with a clear, single source of intrusion doesn't always require it. But we recommend testing before signing a contract whenever:
- The source of a reported leak isn't visually obvious
- A previous repair didn't resolve the complaint
- The scope under discussion is large enough that guessing wrong is expensive
- A board, property manager, or engineer of record needs documentation for insurance, litigation, or reserve planning purposes
In those situations, the cost of the test is small compared to the cost of a repair aimed at the wrong location. Guessing is the expensive option — it just doesn't look that way until the second contract.
If your building has a water intrusion complaint that hasn't been resolved by the obvious fix, or you're about to sign off on a sealant or waterproofing scope and want confidence in where the money is actually going, reach out to our team before the contract is final. We'd rather spend an afternoon testing than have your board revisit this problem next hurricane season.


